Seymour Duncan Antiquity Humbucker Set Pickup for electric guitar

Seymour Duncan Antiquity Humbucker Set

Electric Guitar Pickup

ID: ZMSDGBCP030065

Seymour Duncan
Seymour Duncan Antiquity Humbucker Set
560 €

In stock

Estimated delivery: 6 to 9 October

Accumulate discounts for your card

Best price on the market

Color:
lojaIcon
VIEW STORE STOCK
1
Pagamentos
View all options and shipment methods

Complete your purchase!

Seymour Duncan Antiquity Humbucker Set
Seymour Duncan Antiquity Humbucker Set
560 €
Fender Pickup Switch Strat 5 Positions
Fender Pickup Switch Strat 5 Positions
17.41 €

Seymour Duncan Antiquity Humbucker Set of 2 pickups

The original boutique vintage humbucker pickups to make your Les Paul look vintage and sound priceless. The Antiquity neck humbucker delivers an articulate, yet mellow tone that results from a perfectly balanced frequency response that combines a soft, sweet treble attack with a warm, full sounding low-end. The custom aged alnico 2 bar magnet creates an airy openness to the top-end that gives chords clarity and articulation, while the vintage output coils really bring out the rich harmonic content. Single notes have a beautiful singing quality with just the right amount of treble emphasis.


The Antiquity bridge humbucker delivers that open, airy tone of the great “P.A.F.” humbuckers that Seth Lover designed in 1955. High notes cut through without being overly bright, and low notes growl with spongy vintage warmth. We wind the bridge model a little hotter for better balance and added warmth, and, as with the neck model, we use the same custom hand-aging process to create an authentic vintage look and sound.


Each Antiquity humbucker is built in our Custom Shop and aged both cosmetically and magnetically to simulate the wear and tear that a pickup goes through after decades of playing. The mold we use for our butyrate bobbins was created by the same factory that built the original P.A.F. mold for Gibson.


Other key features include our specially manufactured 42AWG plain enamel mag-wire, nickel silver cover, 2.5-inch alnico 2 bar magnet, custom machined metal spacer & maple spacer, single conductor push-back braided lead wire, and nickel silver bottom plate with long mounting legs. Staying true to the original Gibson P.A.F., these humbuckers are not wax potted, which takes you right to the edge of harmonic breakup. For that unmistakable vintage mojo, we wind every Antiquity humbucker on Seymour’s original Leesona winding machine from the early Gibson factory in Kalamazoo, MI.

Features
check_circle_outline
Each pickup is signed by Seymour Duncan
check_circle_outline
Authentic Vintage Look
check_circle_outline
Alnico II bar magnets
check_circle_outline
ANT-HN at the neck
check_circle_outline
ANT-HB at the bridge
check_circle_outline
Single-wire push-back cable
check_circle_outline
Not sealed with wax
check_circle_outline
Includes complete mounting hardware
check_circle_outline
Made in USA
Specifications
Seymour Duncan Antiquity Humbucker Set
Mixed
Indica a posição de montagem do(s) pickup(s) no instrumento. Alguns modelos de pickup podem ser utilizados em qualquer posição numa guitarra. Outros são específicos para determinadas posições.
Position
Bridge, Neck
Resistência (em Ohms) do pickup.
DC Resistance
7.7 kΩ at the neck pickup and 8.6 kΩ at the bridge pickup
Resonance Frequency
6.65 kHz at the neck pickup and 6.19 kHz at the bridge pickup
Indica a presença ou ausência e o tipo de capa de cobertura de pickups. As capas de pickups servem de protecção para o pickup e têm também um propósito estético.
Pickup Cover
Nickel
Indica o tipo/quantidade de condutores presentes nos pickups. A quantidade de condutores e o tipo de ligação presente vai definir a forma como se faz a conexão dos pickups aos potenciómetros e ao switch.
Wiring
1 Conductor
Output(s)
Medium
Indica o comprimento do artigo. Normalmente medido em cm ou mm. Por vezes também em polegadas.
Length
6.98cm
Item width. Usually measured in mm or cm. And even in inches.
Width
3.79cm

Related