COMBINED EFFECTS FOR THE PROFESSIONAL
The MOOER 'Red Truck' is an all in one solution for the professional guitarist on the go. Following diligent research we've integrated a combination of the most commonly used and desirable effects pedals into one, simple to use, floor unit.
The all analogue Boost, Overdrive and distortion circuits provide lush warm tones. A fully comprehensive collection of high quality digital effects including Modulations, Delays and Reverbs with Tap tempo control provide spacious and ambient atmosphere via the stereo outputs. A highly visible and precise tuner will make sure you are always in tune on stage.
A built in parallel effects loop makes it easy to use with your favorite stompboxes or connect to your favorite amplifiers using the 4 cable method. The Red Truck has stereo outputs and a dedicated Mixer output with speaker simulation for direct connection to your favorite mixing board or audio interface. All the parameters and functions are laid out in front of you just like a traditional pedalboard. Easy to view and adjust on the fly.
The Red Truck is compact and easy to transport with the tidy soft-case we have included in the box. No matter where in the world you are going to play and what you need to connect to you can always take a fully professional pedal effects rig with you with ease.
• 6 effects pedals built into 1 simple unit: Boost, Overdrive, Distortion, Modulation, Delay, Reverb
• Ful festures controls for each effect
• Buil in precision guitar tuner
• Tap tempo synchronization
• Integrated effects loop for connecting external or 4 cable method connection with an amplifier
• Stereo outputs
• Dedicated direct output with speaker simulation for connection to a mixing desk, computer or headphones
• Includes a carry case for easy transportation
TAP: Press several times for tap tempo. Hold for Tuner
Footswitch 1: REVERB on/off in LIVE mode. Preset 1 in PRESET mode
Footswitch 2: DELAY on/off in LIVE mode. Preset 2 in PRESET mode
Footswitch 3: MOD on/off in LIVE mode. Preset 3 in PRESET mode
Footswitch 4: DIST on/off in LIVE mode. Preset 4 in PRESET mode
Footswitch 5: DRIVE on/off in LIVE mode. Preset 5 in PRESET mode
DISPLAY SCREEN: Displays the current operation mode of red truck. Displays the tuner when activated
Redtruck has two different operation modes. LIVE MODE and PRESET MODE To change operation mode, simultaneously press and release TAP + Footswitch 1
In this mode Redtruck operates like a traditional pedalboard. Each footswitch will
switch it’s respective effects module on and off.
In this mode Redtruck operates like a pedalboard loop switcher. Each footswitch will recall a preset combination of which effect modules are on/off.
1.INPUT: Connect your instrument to this input using a standard 1/4” jack cable
2.FX LOOP: Refer to the ‘USING THE FX LOOP’ section of this manual for more details
3.CAB SIM OUTPUT: Connect to this output using a mono or stereo 1/4”jack cable This provides an output with integrated speaker cabinet simulation for connecting headphones or Direct to your PA system or recording console
Connect to these outputs using standard 1/4”Jack cables
Connect to L only for mono output
Connect to L and R for true stereo output
USING THE FX LOOP
Redtruck comes equipped with an integrated, transparent, buffered effects loop. This sits between the DIST and MOD modules in the internal signal chain. The FX LOOP can be used in many different ways, making the Redtruck a true “swiss army knife” of a pedal. Here’s a few of our favourites…..
SEND: Can also be considered as DIST output
RETURN: Can also be considered as MOD input-Add your favourite pedal or preamp to the chain -
This is an easy way to add an extra pedal into the Redtruck signal chain, right inbetween your DIST and MOD. Connect SEND to the input of your favourite pedal. Connect the output of the pedal to the RETURN of Redtruck. We like to use this with our Micro Preamp pedals for the ultimate in portable rigs.
4 CABLE METHOD
If your amplifier has it’s own effects loop you can connect the Redtruck using the “4 cable method” which will put the drive modules in front of your amplifiers input and the modulation, delay and reverb modules into your amplifiers effects loop.
*Connect your guitar to the input of your red truck
*Connect SEND of the Redtruck to your amplifiers input
*Connect your amplifiers “effects send” to the Redtruck RETURN
*Connect the OUTPUT of Redtruck to the “effects return”of your amplifier
WET DRY SETUP
This is an easy way to setup Redtruck with 2 amplifiers. One amplifier with just the drive signal. The other amplifier with drive signal, modulation, delay and reverb effects.
This is a very popular setup method used by professional guitarists to maintain astonishingly clear and articulate tones while still having beautiful atmospheric effects for live shows. To accomplish this setup you will also require an ABY box. We recommend the MOOER ABY mkII
Input: 1/4’ signal input audio interface (impedance 2M ohms)
Output: 1/4 "left and right channel audio interface x2 (impedance 100 ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power supply: DC 9V=1A power adapter (negative inside positive)
Size: 370 mm (D) X 96 mm (W) X 51 mm (H)